The role of the intercooler hose: The high temperature air compressed in the turbocharger is sent into the intercooler with the improvement of the heat resistance requirements of the supercharger system, the inlet pipe material of the intercooler has been changed from the previous silicone rubber to the fluororubber DAI-EL with better heat resistance. In addition, since the oil of the cylinder channeling mixture reduction unit is reduced to the suction side, the oil resistance requirements are also improved.

The function of the intercooler is to reduce the intake temperature of the engine. So why lower the intake temperature? 1. The temperature of the exhaust gas from the engine is very high, and the heat conduction through the supercharger will increase the temperature of the intake air.

(1) Because some automobile hose are installed to the bottom of the car, the hose is as far away from the thermal radiation components as possible during installation, and it is necessary to fashion heat insulation panels;

(2) We should maintain the hose reasonably, try to avoid friction during use, and avoid external damage to the hose, such as long-term friction on the surface of the same component in use;

(3) Check the position of the hose as far as possible when installing the car, and only ensure that the hose is installed in the correct position can avoid the torsion deformation of the hose;

(4) Although some automobile hose is relatively soft, but the hose can not be excessively bent when installed, we must be installed in bulk by special personnel, and can not bend at the root, which will be bad its surface structure.

The above is to introduce the relevant information that should be paid attention to when installing the hose of the intercooler, and I hope that we can better understand the hose of the intercooler through these. If you want to know more, please go to our official website to check, I believe there will be what you need.